To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This custom fit kit lets you mount 4 Rhino-Rack 2500 legs to your vehicle with a naked roof. Clamps mount to legs with bolts. Includes 4 clamps and 4 pads.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today on our 2006 Ford F150 we'll be test fitting the Rhino Rack Vortex Roof Rack System using part numbers RRVA150B-2, RRRLKVA, and DK150. We'll begin our test fit by placing the front crossbar onto the front of our roof. We'll then need to measure two hundred and eighty millimeters from the center of the door jamb to the center of our foot pack. We'll need to make this measurement on both the passenger and driver's side of the vehicle to ensure the front crossbar is perpendicular to the roof and the pads contour to the roof line correctly. With the bar in position we then need to pull back some of the weather stripping to insert the clip in between the weather stripping and the seam of our door. Once this is done we'll use the included tightening tool to tighten down the black bolt, tightening down each side a little bit at a time, just to make sure the bar stays centered. Once everything is all tightened down and secure we can place our rear bar onto the rear of our roof and measure the crossbar spread.
Now the crossbar spread is the measurement from the center of the front bar to the center of the rear bar. It's also important when choosing roof rack accessories. The crossbar spread is five hundred and twenty millimeters. We need to make this measurement on both the passenger and driver's side of the vehicle to ensure that both bars are parallel to each other and perpendicular to the roof of our Ford. Again, using the included tool to tighten down the black bolt.
Once everything is all tightened down and secured we can go ahead and install the locking covers. With everything all tightened down and secured and our covers locked that will complete today's test fit for the Rhino Rack Vortex Roof Rack System using part numbers RRVA150B-2, RRRLKVA, and DK150 on our 2006 Ford F150. .
Average Customer Rating: 4.7 out of 5 stars (3466 Customer Reviews)
This custom fit kit lets you mount 4 Rhino-Rack 2500 legs to your vehicle with a naked roof. Clamps mount to legs with bolts. Includes 4 clamps and 4 pads.Absolutely love the Rhino Rack. Easy to install (watch the [online] video). Looks GREAT. Hauls my kayaks no problem. Very well made and I highly recommend this product.
Works great for carrying my kayak. Installation was pretty easy too
The Rhino Rack 2500 was a bit of a challenge to assemble and mount on my F150. But it is a beauty - rugged and well made. I also bought the Thule Hullavator kayak assist rack and was able to fit it onto the Rhino cross bars with minimal trouble. I feel great about the rack system, and appreciate the help from etrailer's team.
This fit kit perfectly fits my 2013 Ford F-150 FX4 with sunroof. This kit secures my Rhino Rack 2500 series rack legs to the door frames. My doors open and close normally, with no damage to either door or body paint.
Easy to assemble. Still need to install on truck but appears to be exactly what we need to carry our kayak.
I don't normally write reviews but this one was asked for by Carol via email notifying me that my rack had just been delivered. I also received emails when my package was ordered and again when shipped. It was nice to have expectations met in these times. The rhino rack was exceptional quality and installed fairly easily. Will definitely be back whith future trailer needs. Thanks etrailer!
The clamps didn’t fit my 2013 F150 perfectly. They needed to be bent to fit reasonably well. I get more wind noise in the truck with them on.
The product and service provided by etrailer were both excellent. I ordered the 2500 Vortex kit complete and the ordered the Rhino-Rack S606 Vortex Underbar Retainer (anchor spot) I think is a necessity. Mounted on 2009 F150 Super Crew.
Very happy customer
My order arrived sooner than I expected, which was great. The assembly was easy. The installation was trial and error as the crossbar instructions did not list my 2014 F-150 so I had to make some adjustments to the leg position for the racks to sit right. There were only three rubber buffer strips for each 59 inch bar which left gaps in the top which produce a whistle even at low speeds. The whistle is very ennying as I can here it even with the windows rooled up.
These all fit well. Have not put anything on the rack yet but the clips and pads fit my F-150 roof well. The pads have a step down that fit into the small gutter on the side above the door. Only comment is that the roof line is curved where the pads go so they are not perfect.
Perfect fit for my F-150. Easy on and o ff.
Received my Rhino Rack in a timely manor and the install went with no issues. etrailer kept me up to date on the shipping via their web site.
Item was exactly as described and arrived quickly with tracking numbers. Ordered via phone. Customer service was excellent!
Thanks once again.
Everything fit like a glove looks great and the instructions were easy to follow.
This worked out excellent for my 2013 Ford F-150. It was easy to install and the best price anywhere. The order went smooth and the associate I worked with Tim was amazing in customer service. Received this extremely fast also. Thank you!
Works great for my canoe!
A year later and they are still holding up great!!
Wow! Thanks for the fast delivery! I haven't installed the rack yet, but, they look to be well packaged and of excellent quality.
Thanks for the fast service.
Tom
Excellent product
Worked great, love the locks
Great product
Easy to install
I called in the order and got immediate and helpful service. The package arrived within days.
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Alan
3/20/2023
After a year of use, I am still sold on this rack system. Strong and durable, easy to mount and remove.